BUILD IT RIGHT.
TREAT THE SOIL
FIRST.

Why Treating the Soil Early Matters So Much

Once a slab is down, going back to treat the soil underneath for termites and other ground pests turns into a much bigger, messier job. Cutting through finished floors, tearing up landscaping, and maneuvering around a completed structure are all headaches that come with waiting until after the build is finished. Pre-construction treatment sidesteps all of that by applying a full chemical barrier to the soil before the slab is poured, locking protection into the structure from the very start.

Termite pressure is a real and ongoing concern for new builds across Navy Yard City, WA. Colonies are constantly foraging through soil, and a new structure sitting over untreated ground is simply an open invitation to any nearby colony. Skip the pre-treatment step, and the first sign of trouble might not surface until real structural damage has already taken hold under flooring, behind walls, or inside the timber framing itself.

Pestaway Pro delivers pre-construction termite and pest treatment that meets applicable building and pest management standards across Navy Yard City, WA. We work hand-in-hand with builders, contractors, and developers to time treatment for the right construction stage, making sure the soil is treated and documented before concrete goes down. Scheduling is built around your timeline, not the other way around.

Beyond termites, this treatment also covers soil-dwelling insects and other pests drawn to disturbed ground and fresh building materials common on active job sites. We choose our treatment protocols for broad protection right at the soil level, so your new build starts out with the strongest possible defense against pest intrusion.

What You Get With Pre-Construction Treatment

Our Step-by-Step Pre-Construction Treatment Process

1. Reviewing the Project & Building a Plan

   We start by going over your project details — building footprint, foundation type, construction timeline, and any pest pressure specific to the site. From there, we put together a treatment plan covering the products we'll use, the application rates for your site conditions, which treatment stages apply, and how everything fits your construction schedule. All of it gets documented before a single treatment step happens.

2. Applying the Pre-Slab Soil Treatment

   At the right point in construction, our technicians apply chemical treatment to the prepared sub-slab area per the plan. We cover the entire building footprint, paying close attention to the perimeter, any pipe penetrations, and fill soil added to the site. The treatment goes down evenly and at the correct rate so the barrier forms consistently across the whole area before the pour begins.

3. Perimeter Treatment & Follow-Up Work

   Once the slab's down and walls start going up, we come back at the right stage to treat the soil around the exterior foundation. This second pass reinforces the sub-slab barrier and extends coverage to the outer soil zone, where termite activity tends to show up first. Depending on your build and treatment plan, we may also apply void treatments at this point.

4. Handover Documentation & Certification

   Once every treatment stage wraps up, we hand the builder and property owner complete written records — product names, application rates, coverage areas, and treatment dates. This paperwork becomes the official treatment history for the property and should stay with the building's records long-term. We're also glad to field questions from future owners, inspectors, or anyone else who needs details on the treatment down the road.

Your Pre-Construction Treatment Questions, Answered

• When exactly does pre-construction treatment need to happen?▼
  The main soil treatment goes down after sub-slab prep is finished but before the concrete pour. That's the window where the soil is exposed and we can treat the full footprint evenly. Once concrete is poured, that opportunity closes permanently — any termite protection after that point has to come from the exterior, which is far less effective and much more disruptive to install. The perimeter treatment phase happens later, usually once the slab has cured and footings are set. We stay in direct contact with your builder to lock in the right timing for each stage and make sure we're on-site exactly when needed.
• Does this treatment mean I won't need termite inspections once the building's finished?▼
  Pre-construction treatment cuts the risk of termites entering through the foundation dramatically, but it doesn't remove the need for periodic checkups over the building's life. Soil treatments have a limited residual lifespan, and parts of the exterior can still be exposed to termite activity regardless of what's happening under the slab. Routine inspections catch renewed activity around the perimeter early and give us a chance to reinforce the barrier if it's starting to wear thin. We generally suggest owners start scheduling periodic termite inspections a few years after the build wraps up, to make sure protection is holding up as the structure ages.
• My construction is already underway but the slab isn't poured yet — can I still get this done?▼
  Absolutely — as long as the concrete hasn't gone down yet, we can still arrange and apply the soil treatment. What matters most is that the soil is in its prepped state before the pour, since that's our window for effective sub-slab treatment. If you're already mid-schedule and worried about timing, reach out to our Navy Yard City, WA team as soon as you can so we can check where your project stands, confirm the treatment window's still open, and get technicians on-site before the pour happens. We work with active job sites regularly and know how to fit in without throwing off your schedule.